| DONGGUANG
ECON OPTICAL INSTRUMNETS CO.,LTD |
| ON-LINE
COURSE:
|
| PLAY |
The software use overview |
| PLAY |
1.Software page layout introduction |
| PLAY |
2.Command menu tools |
| PLAY |
3.All basic work process and principle |
| PLAY |
4.Gets the scale (each time to adjust objective lens
must to reset take scale) |
| PLAY |
5.Plot and draw border (draw three points, the line,
the arc, the parallel and the perpendicular line) |
| PLAY |
6.The edit and the modify(breaks and extends) |
| PLAY |
7.Label (label length and width, angle, diameter, radius) |
| PLAY |
8.Measure (may to measure data in picture) |
| PLAY |
9.Calls in the picture to contrast with the material
object. |
| PLAY |
10.Calls in the AutoCAD plat to constrast with the material. |
| PLAY |
11.Bird's eye view function |
| PLAY |
12.AutoCAD automatically to put squares. |
| PLAY |
13.Directly measure one |
| PLAY |
14.Directly measure two |
| PLAY |
15.Directly draw |
| PLAY |
16.The machine work platform introduces (ECON-III.Basic
component) |
| PLAY |
17.Use skill |
| PLAY |
18.Attention items |
| |
|
The course is the Flash format, please
download the Flash player if you cannot play 
Please wait a moment, because the network quite slow,
Thanks! |
